Aslam Khan

Technical Requirements

TECHNICAL RIDER – 5-PIECE LIVE BAND Band Line-up - Lead Vocalist + Acoustic Guitar - Lead Guitar - Bass Guitar - Drums - Keyboard PA / FOH System A professional, high-quality PA system appropriate for the venue capacity and audience size is required. - Professional FOH PA system with adequate headroom and coverage - Digital mixing console preferred - Professional stage monitors / in-ear monitoring as required - Minimum 5 separate monitor mixes preferred - Qualified sound engineer / audio technician to operate FOH and monitors - Complete stage cabling, DI boxes, stands and necessary accessories - System must be properly tuned and sound-checked before the performance Input Requirements 1. Lead Vocal – Vocal microphone 2. Acoustic Guitar – DI 3. Lead Guitar – Mic/DI as applicable 4. Bass Guitar – DI 5. Kick Drum – Dynamic microphone 6. Snare Drum – Dynamic microphone 7. Hi-Hat – Condenser microphone 8. Tom 1 – Dynamic microphone 9. Tom 2 – Dynamic microphone 10. Floor Tom – Dynamic microphone 11. Overhead L – Condenser microphone 12. Overhead R – Condenser microphone 13. Keyboard L – DI 14. Keyboard R – DI Approx. 14 input channels required, subject to final stage setup and equipment used. Stage Requirements - Adequate stage space for a 5-piece band - Stable and level stage with sufficient room for all instruments and performers - Minimum 4–5 power outlets distributed across the stage - Safe and accessible power supply - Appropriate microphone stands - Keyboard stand - Guitar stands - Drum riser preferred where available - Adequate stage lighting for all performers Drum Setup A professional acoustic drum kit is preferred, including: - Kick - Snare - Hi-hat - Toms - Floor tom - Cymbals - Drum throne - Hardware If an acoustic drum kit is not available at the venue, the band can carry a V-Drum / electronic drum kit. In that case, suitable PA inputs, monitoring and power supply should be provided. Monitoring Individual monitoring is preferred for: - Lead Vocal - Lead Guitar - Bass - Drums - Keyboard The final monitoring configuration can be adjusted according to the venue and sound system. Soundcheck A minimum 60–90 minutes of soundcheck and line check is requested before the performance. The sound system should be fully set up, patched and operational before the band arrives for soundcheck. Power & Safety - Stable and properly earthed electrical supply - All power distribution should comply with venue safety standards - No loose or exposed electrical cables across performer walkways - Proper cable management and taping required where necessary - Adequate power capacity for backline and electronic equipment Venue / Production Support A professional sound engineer familiar with live-band mixing is requested to remain available throughout the performance. Final technical requirements may be adjusted after reviewing the venue size, stage dimensions, existing PA system and event format. Please share the venue stage plot, available PA specifications and equipment list with the band/production team in advance for technical confirmation.

Set & Breaks

2 × 45-minute sets with a 15-minute break between sets. Flexible timing can be discussed based on the event schedule.